Mcculloch Mac 130 Manual

McCulloch 100 Series & 160S

Mcculloch Mac Mini Mac Power Mac Super Pro Eager Beaver Recoil Starter Spring. Item: Recoil Starter Spring Model Fit: Mcculloch Mac110, 120, 130,140, Mini Mac 6, 25, 30, 35, Power Mac 6, Pro Mac 55, Pro Mac 510, Super Pro 40, Super Pro 310, 320, 330, 340 Mcculloch Eager Beaver. Titan 7 Chainsaws. View online or download 1 Manuals for McCulloch Mac 110; Mac 120; Mac 130. Besides, it’s possible to examine each page of the guide singly by using the scroll bar. This way you’ll save time on finding the necessary info.

McCulloch 100 Series & 160S

Mcculloch Mac 130 Chainsaw Manual

General Assembly

ID	Parts Number	Parts Description	Notes
1	110676	Nut-Hex Head 1/4-28 (65-75 in. lb. torque)
2	110972	Screw-Hex 1/4-28x3/4
3	Chain Brake Assembly
4	Saw Chain
5	Guide Bar
6	218886	Grinder Assembly	Used on units equipped with Auto Sharp
7	215447	Knob - Auto-Sharp	Used on units equipped with Auto Sharp
8	110583	Screw-Pn Hd 8-32 x 44 (35-40 in. lb. torque)	Used on units equipped with Auto Sharp
9	215209	Bracket - Auto-Sharp	Used on units equipped with Auto Sharp
10	110639	Screw-Hex Hd 12-24 x 1 (55-60 in. lb. torque)
11	218867	Cover-Fuel/ Oil Tank
12	93194-01	Washer-Rubber
13	92479	Lever/ Handguard
14	213278	Kit-Clutch
15	93608	Spring-Assembly
16	110957	Rivet-Flt. 1/8 x .547
17	85064	Plate
18	94247	Kit-Rotor
19	94244	Nut-Clutch (160-170 in. lb. torque)
20	94243	Plate-Dust
21	215252	Drum/Sprocket/Bearing Assembly
22	91222	Kit-Needle Bearing
23	215259	Spacer-Drum
24	110953	Screw-Hx Hd 12-24 x 5/8 (70-80 in. lb. torque)
25	110686	Screw-Hx Hd 13-16 x 2 (35-45 in. lb. torque)
26	214505	Frame/Grip Assembly
27	217761	Kit-Fuel/Oil Tank
28	91148	Seal-Fuel Vent
29	84956	Pickup-Fuel
30	217755	Piston-Manual Oiler
31	83946	Spring-Piston
32	85557	Body-Oiler
33	216668	Cap-Fuel/Oil
34	217759	Rod-Manual Oiler
35	110672	Screw-Oval Hd 4-40 x 1
36	83870	Knob - Choke
37	93437	Latch Assembly - Throttle	Used on models with Throttle Latch on the carburetor.
38	Screw-Long Neck	Used on models with Throttle Latch on the carburetor.
39	Latch-Throttle	Used on models with Throttle Latch on the carburetor.
40	Spring-Compression	Used on models with Throttle Latch on the carburetor.
41	217908	Handle/Safety Trigger Assembly	Used on models with Throttle Latch on the carburetor.
218130	Handle/Safety Trigger Assembly/Throttle Latch Assembly	Used on models with Throttle Latch on the handle.
42	Knob-Throttle Latch	Used on models with Throttle Latch on the handle.
43	Spring-Throttle Latch	Used on models with Throttle Latch on the handle.
44	Rivert-Flat	Used on models with Throttle Latch on the handle.
45	68566	Screw-Idle Adjustment	Used on models with Throttle Latch on the handle.
46	110807	Screw-Pan Hd 8-32 x .312 (35-50 in. lb. torque)
47	93290	Deflector-Sawdust
48	217015	Shroud-Using Auto Sharp	Used on units equipped with Auto Sharp
216963	Shroud-Non Auto Sharp
49	91851	Cover-Air Filter
50	91796	Screw-Filter Cover
51	216905	Filter-Air
52	84918	Washer-Air Seal
53	216490	Screw-Hex Hd 12-24 x .76 (70-80 in. lb. torque)
54	110959	Screw-Hex Hd 8-32 x .50 (25-30 in. lb. torque)
55	90425	Housing-Starter
56	110041	Screw-Pan Hd 8-32 x .50 (20-25 in. lb. torque)
57	68497	Washer-Special
58	213257	Drum/Rope Assembly	Also included in Starter Drum/Pawl Kit, p/n 213261. See Service Bulletin 1833.
59	83203	Rope-Starter
60	83078	Spring-Rewind
61	91255	Kit-Starter Handle
62	105490	Washer-Starter Handle
63	110953	Screw-Hex Hd 12-24 x .625 (20-25 in. lb. torque)
64	84520-01	Plate-Washer
65	84519	Sleeve-Handle
66	217909	Trigger-Throttle
67	83940	Spring-Tringger Return
68	83935	Contact-Switch
69	83936	Protector-Switch
70	83934	Button-Switch
71	218853-01	Decal-2.0 Cu. In.
218884-01	Decal-Name Eager Beaver
72	219058	Label-Safety
73	Powerhead Asy.

Mcculloch Mac 130 Chainsaw Service Manual

Carburetor Assembly-ZAMA

Mcculloch Mac 120 Manual

ID	Parts Number	Parts Description
214082-01	Carburetor Assy-Zama M1-M7	One of two carburetors used alternately. Identify carburetor before ordering repair kits.
1	Screw - Plate
2	Valve - Choke
3	Valve - Throttle
4	Spring - Choke
5	Ball - Friction
6	'E' Ring
7	Shaft Assembly - Throttle
8	Spring - Throttle Return
9	Screw - Idle Adjustment	Contained in Needle Kit, P/N 217086.
10	Screw - Main Adjustment	Contained in Needle Kit, P/N 217086.
11	Spring - Screw	Contained in Needle Kit, P/N 217086.
12	Screw - Cover
13	'C' Ring
14	Strainer	Contained in Repair Kit, P/N 217079.
15	Cover - Pump
16	Screen	Contained in Repair Kit, P/N 217079.
17	Kit - Pump diaphragm	Contained in Gasket/Diaphragm Kit, P/N 216722. , Contained in Repair Kit, P/N 217079.
18	Body - Pump
19	Diaphragm - Main	Contained in Gasket/Diaphragm Kit, P/N 216722. , Contained in Repair Kit, P/N 217079.
20	Gasket - Main	Contained in Gasket/Diaphragm Kit, P/N 216722. , Contained in Repair Kit, P/N 217079.
21	Disk	Contained in Repair Kit, P/N 217079.
22	Screw	Contained in Repair Kit, P/N 217079.
23	Pin-Arm	Contained in Repair Kit, P/N 217079.
24	Arm - Needle Valve	Contained in Repair Kit, P/N 217079.
25	Spring - Arm	Contained in Repair Kit, P/N 217079.
26	Valve - Needle	Contained in Repair Kit, P/N 217079.
27	Plug - Welch	Contained in Repair Kit, P/N 217079.
28	Valve Asy - Main Nozzle	Contained in Repair Kit, P/N 217079.

Carburetor Assembly-WALBRO

ID	Parts Number	Parts Description
214082-01	Carburetor Assy - Walbro MDC	One of two carburetors used alternately. Identify carburetor before ordering repair kits.
1	Screw - Plate	Contained in Major Repair Kit, P/N 217084
2	Plate - Choke
3	Ball - Choke Friction	Contained in Major Repair Kit, P/N 217084
4	Spring - Choke Friction	Contained in Major Repair Kit, P/N 217084
5	Plate - Throttle
6	Screw - Clip
7	Clip - Throttle Shaft
8	Shaft Assembly - Throttle
9	Needle - Idle	Contained in Major Repair Kit, P/N 217084
10	Needle - High Speed	Contained in Major Repair Kit, P/N 217084
11	Spring - Needle	Contained in Major Repair Kit, P/N 217084
12	Screw Assembly - Body	Contained in Major Repair Kit, P/N 217084
13	Cover Assembly - Pump
14	Ring - Vent Screen	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
15	Vent - Screen	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
16	Diaphragm - Fuel Pump	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
17	Gasket - Metering Diaphragm	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
18	Body - Fuel Pump
19	Diaphragm Assembly - Metering	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
20	Gasket - Fuel Pump	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
21	Screw - Metering Lever Pin	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
22	Pin - Metering Lever	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
23	Valve - Inlet Needle	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
24	Lever - Metering	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
25	Spring - Metering Lever	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
26	Plug - Welch 7/16	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
27	Screen - Inlet	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
28	Ring - Inlet Screen	Contained in Major Repair Kit, P/N 217084
29	Plug - Welch 1/2	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
30	Screen	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
31	Ring - Retaining	Contained in Major Repair Kit, P/N 217084 , Contained in Minor Repair Kit, P/N 216727
32	Spring - Throttle Return

Powerhead Assembly

ID	Parts Number	Parts Description	Notes
1	86438	Valve-Check	Used on units with manual oiler only.
2	217156	Connector-Oil Tank/Bar Pad	Used on units with manual oiler only.
3	105603	'O' Ring-Connector Spacer	Used on units with manual oiler only.
4	217168	Connector-Pump/Bar Pad	Used on units equipped with automatic oiler.
5	217167	Connector-Pump/Oil Tank	Used on units equipped with automatic oiler.
6	83896	Bail-Pump Retaining	Used on units equipped with automatic oiler.
7	216563	Automatic Oil Pump Assembly	Used on units equipped with automatic oiler.
8	83891	Spring - return	Used on units equipped with automatic oiler.
9	110651	Screw - Oil Flow Adjustment	Used on units equipped with automatic oiler.
10	Body - Pump	Used on units equipped with automatic oiler.
11	216426	Kit - Oil Pump Repair	Used on units equipped with automatic oiler.
12	105603	'O' Ring-.114 x .070	Used on units equipped with automatic oiler.
13	Ring - Oil Pump Piston	Used on units equipped with automatic oiler.
14	Piston Assembly - Oiler	Used on units equipped with automatic oiler.
15	Sleeve-Oil Pump	Used on units equipped with automatic oiler.
16	Eyelet	Used on units equipped with automatic oiler.
17	110653	'O' Ring - Pump/Crankcase	Used on units equipped with automatic oiler.
18	215411	Muffler Assembly	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
19	110681	Screw-Skt. Hd. 10-24 x .250 (40-45 in. lb. torque)	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
20	92961	Deflector-Exhaust	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
21	213327	Screw-Special (70-80 in. lb. torque)	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
22	214204	Kit-Spark Arrestor Screen	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
23	101987	Screw-6-32 x .250	Used on Mac 110-03, 04, 05 and 06; Mac 120-02 and 11; Mac 130-07 , 13 and 20; All Eager Beaver models.
24	215871	Nut - Muffler (40-60 in. lb. torque)	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
25	215471	Plate-Lock	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
26	215472	Deflector-Exhaust	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
27	216805	Screen-Spark Arrestor	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
28	215774	Cover	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
29	215776	Baffle	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
30	213369	Screw-Hex Wsh M6 (70-85 in. lb. torque)	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
31	215757	Bolt-Shoulder (65-85 in. lb. torque)	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
32	215773	Base	Used on Mac 110-01, 03, 04, 07, 08, 11, 13, 14, 20 and 27; Mac 120-02; Mac 130-06, 07, 20; All Eager Beaver Models.
33	62345	Spark Plug-CS45T AC	Used on Mac 110-01, 03 and 08; Mac 130-06, 07 and 20; Mac 160S-02 and 03; All Eager Beaver models except 07.
92879	Spark Plug-RDJ8J CH	Used on Mac 110-04, 05, and 15: Mac 120-11 and 17; Mac 130-12 and 13; and Eager Beaver -07.
34	216039	Rod-Throttle
35	89059	Hose-Fuel
36	90660	Adaptor-Fuel Hose
37	110908	'O' Ring - Adaptor
38	216640	Nut-Hex 5/16-24 (200-220 in.ib. torque)
39	94737	Flywheel/Pawl Assembly
40	216984	Pin-Pawl	See Service Bulletin 1833. When replacing metal pawls with plastic pawis, order these components. The plastic drum is also available with these components by ordering Starter Drum/Pawl Kit, p/n 213261.
41	216982	Spring-Pawl	See Service Bulletin 1833. When replacing metal pawls with plastic pawis, order these components. The plastic drum is also available with these components by ordering Starter Drum/Pawl Kit, p/n 213261.
42	93469	Washer-Pawl	See Service Bulletin 1833. When replacing metal pawls with plastic pawis, order these components. The plastic drum is also available with these components by ordering Starter Drum/Pawl Kit, p/n 213261.
43	216983	Pawl-Starter	See Service Bulletin 1833. When replacing metal pawls with plastic pawis, order these components. The plastic drum is also available with these components by ordering Starter Drum/Pawl Kit, p/n 213261.
44	102164	Key-Woodruff
45	110586	Screen-Pan Head 8-32 x 1.75
46	105976	Washer-No. 8 Plain
47	67177	Washer-Insulating
48	68198	Tube-Insulating
49	Carburetor Assembly
50	68197	Gasket-Carburetor
51	219389	Connector/Insulator Assy	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
52	219754	Insulator-Carburetor	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
53	219753	Screw-Connector	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
54	219390	Connector-Stop Switch	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
55	213032	Screw-Hex HD 8-32 x 1/2	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
56	217758	Connector-Stop Switch	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
57	Eyelet-Connector	One of two (2) Stop Switch Connectors installed by the factory. Be sure to identify the connector used on your unit before ordering replacement parts. Note: Item51. p/n 219389 may be used as replacement for items 55, 56 and 57.
58	90714	Gasket-Insulator
59	84957	Coil-Lamination Assembly	Used on 11 level Eager Beaver units.
60	215351	Wire Assembly-Spark Plug	Used on 11 level Eager Beaver units.
61	110364	Screw-Pan Head 6-32 x 5/8	Used on 11 level Eager Beaver units.
62	69344	Wire Assembly Coil	Used on 11 level Eager Beaver units.
63	110041	Screw-Pan Head 8-32 x 1/2	Used on 11 level Eager Beaver units.
64	85358	Condenser	Used on 11 level Eager Beaver units.
65	100035	Nut-Hex 6-32	Used on 11 level Eager Beaver units.
66	84502	Connector-Stop Switch	Used on 11 level Eager Beaver units.
67	67841	Cover-Breaker Box	Used on 11 level Eager Beaver units.
68	69323	Seal-Breaker Box	Used on 11 level Eager Beaver units.
69	213032	Screw-Hex Head 8-32 x 1/2	Used on 11 level Eager Beaver units.
70	69322	Washer-Special	Used on 11 level Eager Beaver units.
71	105876	Washer-No. 8	Used on 11 level Eager Beaver units.
72	88811	Breaker-Assembley	Used on 11 level Eager Beaver units.
73	54505-01	Kit-Breaker Box	Used on 11 level Eager Beaver units.
74	92037	Washer	Used on 11 level Eager Beaver units.
75	217031	Electronic Ignition Assembly	Used on 12 level Eager Beaver models and 17 level and 18 level Mac models.
76	217190	Wire Assembly-Stop Switch	Used on 12 level Eager Beaver models and 17 level and 18 level Mac models.
77	217165	Cylinder/Crankcase Using Auto Sharp	Used on units equipped with Auto Sharp.
216935	Cylinder/Crankcase Using Automatic Oiler
217067	Cylinder/Crankcase Without Automatic Oiler
216950	Cylinder/Crankcase Using Automatic Oiler	Used on Mac 160 S and Eager Beaver Super 16 models only.
78	120097	Screw-Hex M5 x 0.8 x 25 (70-80 in. lb. torque)
79	83856	Bolt-Bar Mounting
80	110914	Plug-Cup
81	94662	Piston Assembly
216713	Piston Assembly	Used on Mac 160 S and Eager Beaver Super 16 models only.
82	95143	Set-Piston Rings
216705	Set-Piston Rings	Used on Mac 160 S and Eager Beaver Super 16 models only.
83	92836	Pin-Piston
84	111026	Ring-Snap
85	94135	Connecting Rod Assembly
86	94654	Screw-Connecting Rod
87	68095	Roller-Needle (set of 20)
88	110984	Bearing-Needle
89	213282	Bearing-Crankshaft	if the Crankshaft Bearing and Seal have been installed into a Metal Sleeve, order part number 93763 which includes the Sleeve and item numbers 89 and 90.
90	83859	Seal-Crankshaft	if the Crankshaft Bearing and Seal have been installed into a Metal Sleeve, order part number 93763 which includes the Sleeve and item numbers 89 and 90.
91	217029	Crankshaft

Chain Brake Assembly

ID	Parts Number	Parts Description	Notes
216551	Chain Brake Assembly	Used on Mac 110-A, N and 0; Mac 120-P and Q; and Mac 130-F and L.
216417	Chain Brake Assembly	Used on all Eager Beaver and Mac 110-C, D, E and H; Mac 120-B and K; and Mac 130-G, M and T.
1	111047	Srew-Pan Hd 8-32 x .625
2	94709	Band-Brake
3	215758	Kit-Latch
4	Spring-Compression
5	93602	Pivot-Latch
6	216549	Pivot-Lever
7	216417	Lever Assembly-Actuating
8	92867	Lever
9	213907	Pin-Roller
10	214368	Bearing-Roller
11	60658	Screw-Adjusting
12	110907	Ring-Retaining
13	84929	Nut-Bar Adjusting
14	216553	Housing-Brake	Used on Mac 110-A, N and 0; Mac 120-P and Q; and Mac 130-F and L.
216414	Housing-Brake	Used on all Eager Beaver and Mac 110-C, D, E and H; Mac 120-B and K; and Mac 130-G, M and T.

You are here: Home > Parts & Tools > Chainsaws > McCulloch > McCulloch MAC 130 > Chain

The McCulloch MAC 130 chain is an extremely important part of the chain saw. The chain must effectively cut the wood fibers fast and cleanly. In order to carry the sawn wood chips away, the chain must have a sharp and durable cutting edge. Chain saw chain comes in many different configurations from professional chisel chain [square tooth] to semi-chisel [round tooth] chain to safety chain saw chain for the occasional user. McCulloch MAC 130 Chain saw chain comes in many combinations to include full chisel chain, semi chisel chain, full skip chain, ripping chain, carving chain and harvester chain. For more information on measuring McCulloch MAC 130 chain saw chain, determining pitch of chain, and using the chain reference chart, feel free to browse the chain saw chain information section.

If your McCulloch MAC 130 chain is excessively worn, stretched, or has been sharpened many times, it needs to be replaced with our high quality suitable replacement chainsaw chain parts below.

Suitable Replacement McCulloch MAC 130 Chain Parts

Chain saw chain design has come a long way in the last 60 years. Currently, chains are being designed on computers. The manufacturing process has also advanced to new levels to permit worldwide delivery of the best combinations of chain available. To get maximum power and performance out of your chain saw and optimum power when cutting wood, make sure your saw has a sharpe chain or new suitable replacement McCulloch MAC 130 chain parts.

McCulloch MAC 130 Chain Types & Configurations

Chain saw chain comes in many different configurations from professional chisel chain [square tooth] to semi-chisel [round tooth] chain to safety chain saw chain for the occasional user. McCulloch MAC 130 Chain saw chain comes in many combinations to include full chisel chain, semi chisel chain, full skip chain, ripping chain, carving chain and harvester chain.

Every chain must be driven to perform work. On the bottom of every McCulloch MAC 130 chain there are drive links that are v-shaped. The drive links ride into the bar groove to guide the chain in the cut.

The cutter has several different parts. First, there is a top plate which is the top of the cutter and is the leading edge of the cutter tooth. There are both left and right cutters that alternate from left to right and left again. Next, the depth gauge controls how deep the cutter tooth cuts. There is also a gullet which funnels the wood chips away underneath the cutter and ejects them when the chain reaches the sprocket. The toe of the McCulloch MAC 130 chain cutter rides on the bar groove and is on the front bottom of the cutter. Another toe on the bottom rear of the cutter can become worn as the tooth rocks when cutting the wood fibers. Finally, there are rivet holes where the bearing rivet rides.

The last part of the McCulloch MAC 130 chain is the tie strap that is opposite the cutter tooth. This strap helps to connect the chain together.

McCulloch MAC 130 Chain Maintenance

The chain saw chain requires periodic maintenance of the chain cutters. You can either file the McCulloch MAC 130 chain with a chain saw file or use an electric sharpener (12 volt or 110 AC chain grinder) to sharpen the cutter for top performance.

The top five things to remember to get top performance from your chain are:

1- Your chain must be sharp

2- Your chain‹??s depth gauge must be properly set per manufacturer's specifications

3- Your chain must be properly tensioned

4- Your chain must be properly lubricated

5- Your bar must be in good shape

General things to know about different types of McCulloch MAC 130 chain and for cutting conditions:

Skip tooth chain is generally used for longer bars sized 24‹?? and up. Skip tooth chain is usually for the professional and has more kick back tendencies.

Ripping chain is designed to cut with the grain of the wood and not against it, the chain is sharpened either 10 or 15 degrees and is intended for saw mills.

Semi-chisel chain [round tooth] is one the most overlooked chains on the market. The round cutter is more forgiving in dirty wood conditions when compared to the chisel cutter chain. This type of McCulloch MAC 130 chain cuts a little slower but stays sharper longer than chisel chain.

Chisel chain is by far the fastest cutting chain available for chain saws, with its square teeth, it cuts faster than the semi chisel round tooth chain. However, McCulloch MAC 130 chisel chain doesn‹??t perform well in dirty conditions. Once the points get dull, chain cutting performance decreases significantly.

To determine your replacement McCulloch MAC 130 chain, count the drive links on the chain. The drive links are v-shaped and go into the bar groove. You may also find a number on the drive link along with the manufacture of the chain. Armed with this information, you can check the chain reference chart or go to the saw manufacturer to find and the bar and chain information for your model number.

For more information on measuring chain saw chain, determining pitch of chain, and using the chain reference chart, feel free to browse the chain saw chain information section.

Important Notice - We are not affiliated with any chainsaw manufacturers and we do not attempt to make any affiliations with them. Any manufacturer logos, model names and numbers are the sole property of their respective owners and are used here for the sole purpose of reference. We do not sell OEM chainsaw parts for any brand. We do however, offer high quality suitable replacement parts guaranteed to meet or beat OEM part specifications like our suitable replacement Chainsaw McCulloch MAC 130 chain we offer for sale for you to buy and put into their brand of chainsaws.

Crownload554